R&S FSL Saving and Recalling Settings Files - FILE Key
1300.2519.12 4.515 E-11
Disable all Items
Selects none of the items for saving or loading.
This softkey is available from firmware version 1.70.
Remote: MMEM:SEL:NONE
Delete File
Deletes the selected settings file.
Remote: MMEM:CLE:STAT 1,'TEST'
Recall
Opens the Recall dialog box to load a settings file. To navigate in the dialog box, use the
corresponding softkeys. For details see also "Navigation in the dialog boxes for saving and
loading settings files" on page 4.511.
Path Directory from which the settings file is loaded. The default path for
user settings files is C:\r_s\instr\user
Files List of stored settings files
File Name Name of settings file
Comment Comment of the settings file
[Items] Items saved in the settings file
Startup Recall
Activates or deactivates the startup recall function. If activated, the settings stored in the file
selected via the Startup Recall Setup softkey are loaded when booting or for preset. If
deactivated, the default settings are loaded.
This softkey is available from firmware version 1.10.
Remote: MMEM:LOAD:AUTO 1,'C:\R_S\Instr\user\TEST'
Startup Recall Setup
Opens the Startup Recall dialog box to select the settings file for the startup recall function (see
also Startup Recall softkey).
This softkey is available from firmware version 1.10.
Remote: MMEM:LOAD:AUTO 1,'C:\R_S\Instr\user\TEST'
To Next Page
Loading...
