WiMAX, WiBro Measurements (K92/K93) – Status Reporting System R&S FSL
1300.2519.12 5.46 E-11
Bit No Meaning
6
auto level NoSIGnal
This bit is set if no signal is detected by the auto–level measurement.
7 to 14 These bits are not used.
15 This bit is always 0.
Error Reporting
Error reporting for the WiMAX IEEE 802.16 OFDM, OFDMA Measurements option (R&S FSL–K92/K93)
is carried out using the Service Request (SRQ) interrupt in the GPIB interface. When an error occurs a
Service Request interrupt will be generated. The master can then query the slave instrument for the
error that triggered the interrupt errors are queried through the "SYSTem:ERRor'' command.
To Next Page
Loading...
