Rohde & Schwarz R&S FSL3 - Abort Subsystem

ABORt Subsystem R&S FSL
1300.2519.12 6.10 E-11
ABORt Subsystem
The ABORt subsystem contains the commands for aborting triggered actions. An action can be
triggered again immediately after being aborted. All commands trigger events, and therefore they have
no *RST value.
Commands of the ABORt Subsystem
– ABORt
ABORt
This command aborts a current measurement and resets the trigger system.
Example
ABOR;INIT:IMM
Characteristics
RST value: –
SCPI: conform
Mode
all