R&S FSL MMEMory Subsystem
1300.2519.12 6.157 E-11
C
haracteristics
*RST value: -
SCPI: device-specific
M
ode
all
MMEMory:COMMent
This command defines a comment (max. 60 characters) for a device setting to be stored.
Example
MMEM:COMM ’Setup for FM measurement’
Characteristics
*RST value: blank comment
SCPI: device-specific
Mode
A
MMEMory:COPY
This command copies the files indicated in <file_source> to the destination directory indicated
with <file_destination> or to the destination file indicated by <file_destination> if <file_source> is
just a file.
This command is an event and therefore has no *RST value and no query.
Parameter
<file_source>,<file_destination> = <file_name> = DOS file name
The indication of the file name may include the path and the drive name. The file names and
path information must be in accordance with the DOS conventions.
Example
MMEM:COPY 'C:\R_S\Instr\user\SETUP.CFG','E:'
Characteristics
*RST value: -
SCPI: conform
Mode
all
MMEMory:DATA
This command writes the block data contained in <block> into the file characterized by
<file_name>. The delimiter must be set to EOI to obtain error-free data transfer.
The associated query command reads the indicated file from the mass memory and transfers it
to the remote control computer. It should be noted that the buffer memory of the control
computer should be large enough to store the file. The setting of the delimiter is irrelevant in this
case.
The command is useful for reading stored settings files or trace data from the instrument or for
transferring them to the instrument.
To Next Page
Loading...
