R&S NRP Remote Control - Commands
1144.1400.12 6.43 E-3
MEMory:TABLe:SELect[?] <string>
Selects the table name < string>. The following commands affect this table:
• MEMory:CLEar[:NAMe] <string>
• MEMory:CLEar:TABLe
• all MEMory:TABLe commands
The selection is not changed in case of an *RST or a SYSTem:PRESet.
*RST value: none
Error messages:
-256
"File name not found": A table named
<string> is not known.
To Next Page
Loading...
