Rohde & Schwarz R&S RTO Series - Page 101

Trying Out the Instrument
R&S
®
RTO
70Getting Started 1316.0833.02 ─ 10
5. For further usage of the results, select the "CSV-Delimiter" that is used to convert
the values in columns. For MS Excel, the semicolon is recommended.
6. Tap "Save".
The results are saved to the following folder:
C:\Users\Public\Public Documents\Rohde-Schwarz\RTx\
ResultBoxExport
The file name is created according to the autonaming settings.
Saving and restoring device settings
1. Press the FILE key on the front panel.
2. Select the "Save/Recall" tab.
3. Select the "Settings" tab.
4. Tap "Save As" and enter the path and file name.
C:\Users\Public\Public Documents\Rohde-Schwarz\RTx\SaveSets\
Settings_Meas1.dfl
5. Tap "Save".
6. Press the PRESET key on the front panel to restore the default instrument settings.
7. In order to repeat the initial measurement, load the saved device settings.
Tap the"Load saveset" icon on the toolbar.
8. Use the buttons on the left and the right to scroll the stored savesets. The file name
and a screenshot are shown it identify the correct saveset.
9. Tap "Load".
The device and measurement settings are restored and you can repeat the mea-
surement.
Saving Data