Rohde & Schwarz R&S RTO Series - Page 104

Operating the Instrument
R&S
®
RTO
73Getting Started 1316.0833.02 ─ 10
Fig. 5-1: Display information
1 = Diagram
2 = Grid
3 = Horizontal and trigger label
4 = Signal icon with main vertical and acquisition settings
5 = Signal icon with minimized live signal view
6 = Trigger level
7 = Trigger position
8 = Reference point (Distance from trigger position to reference point = horizontal position)
9 = Zoom area
10 = Zoom diagram
11 = Histogram area
12 = Histogram
13 = Messages
Diagrams
A diagram shows one or more waveforms: channel, reference, and math waveforms
together with histograms, masks etc. Zoom details appear in separate zoom diagrams,
also XY-waveforms appear in separate diagrams.
By default, the diagram name contains the diagram number and the short names of the
waveforms shown inside. To change the diagram name, touch and hold the tab name.
The on-screen keyboard opens to enter the new name. Names must be unique.
Information on the Display