Operating the Instrument
R&S
®
RTO
81Getting Started 1316.0833.02 ─ 10
Run Cont
Starts and stops the continuous acquisition. The icon has the same functionality as the
corresponding key on the front panel. It is useful when you control the instrument
remotely.
Run Single
Starts a defined number of acquisition cycles. Press the key again to stop running
acquisitions. The icon has the same functionality as the corresponding key on the front
panel. It is useful when you control the instrument remotely.
Label
Defines a waveform label that names or explains the waveform. Tap the icon and then
tap the waveform to be labeled. If you tap the display background, the label is assigned
to the selected waveform. Enter the label text using the onscreen keyboard. The text is
shown in the same color as the assigned waveform. You can drag the label to another
position.
Update reference waveform
Copies the selected source waveform with all its settings to the reference waveform. If
the acquisition is running, the reference waveform is a snapshot. You can configure up
to four reference waveforms. Select the required REference Waveform (R1 to R4) in
the toolbar menu of the icon.
Save waveform
Exports the waveform data to file using the settings defined in FILE > "Waveforms /
Results" > "Waveforms". The file name is created according to the autonaming pattern
Tap the icon and then tap the waveform to be exported. If you tap the display back-
ground, the selected waveform is exported, or a multi-channel export is performed if
configured.
5.3.3 Toolbar Configuration
You can configure the contents of the toolbar so that only the functions you use are
displayed. Furthermore, date and time can be hidden. The toolbar configuration is part
of the user preferences. It is retained when you switch off and on the instrument, and
you can save it in the user preferences and user-defined preset.
1. On the "Display" menu, select "Toolbar".
2. Enable the "Visible" option for all functions you need, and disable the functions that
you do not need.
3. To hide the current date and time on the toolbar, disable "Show date and time".
Toolbar
To Next Page
Loading...
