Rohde & Schwarz R&S RTO Series - Messages; Getting Information and Help; Displaying Tutorials

Operating the Instrument
R&S
®
RTO
93Getting Started 1316.0833.02 ─ 10
5.9 Messages
Status messages of the instrument are displayed for a few seconds, then they are
shown in a message box in the upper right corner of the screen. By default, the mes-
sage box is closed. You can open it to read the messages and to delete them.
► Tap the yellow "Info" button to open and close the message box.
If no messages are available, the "Info" button is hidden.
Important messages are indicated by a red "Info" button. These messages cannot be
deleted, they remain until the problem is solved.
5.10 Getting Information and Help
In many dialog boxes, graphics are included to explain the way a setting works. For
further information, you can use the following sources:
●
Tutorials demonstrate the general usage of the R&S RTO, for example, how to use
the SmartGrid.
●
Tooltips give a short description of the parameter.
●
The context help provides functional description on a setting, and the correspond-
ing remote command.
●
The general help explains a dialog box, provides instructions, and general informa-
tion.
5.10.1 Displaying Tutorials
Tutorials are silent movies, which are available directly on the instrument, on the Docu-
mentation CD-ROM on the "Movies" tab, and on the Internet. They show basic usage
aspects.
To see a tutorial on the instrument
1. On the menu, tap "Tutorials".
2. Tap "Getting Started".
3. Tap the tutorial that you want to see.
Messages