Trying Out the Instrument
R&S
®
RTO
56Getting Started 1316.0833.02 ─ 10
Now the result box also shows the result of the time measurements.
9. Tap "Set as QuickMeas".
The current configuration is set as default quick measurement and can be repeated
until you save another configuration.
10. Close the dialog box.
11.
To save space in the display, minimize the result box:
The most important results are displayed and updated in the result icon, as well.
Do not close the result icon, as you need the results for the Search example (see
chapter 4.10, "Performing a Search", on page 62).
4.7.4 Displaying a Histogram
Histograms are useful to analyze the occurrence of measurement values statistically.
The usage of histograms is also shown in a short video that is available on the instru-
ment: "Tutorials > Getting Started > Histogram".
1. Tap the "Histogram" icon on the toolbar.
Showing Basic Measurement Results
To Next Page
Loading...
