System Overview
R&S
®
SFE100
12Getting Started 2112.4122.62 ─ 13
3.1.1 Baseband Section
The baseband section of the R&S SFE100 contains the hardware for generating and
processing I/Q signals. It is entirely digital in design.
Depending on the R&S SFE100 model, the baseband section provides all of the trans-
port stream (TS) interfaces and handles processing of the transport streams. The TS/
Video generator option is also found here. The ARB hardware option can also be
installed on this subassembly.
Basic Instrument Concept
To Next Page
Loading...
