Interfaces and Connectors
R&S
®
SFE100
18Getting Started 2112.4122.62 ─ 13
For information on corresponding keys of an external keyboard see Table 6-1.
During remote operation, you can use the virtual keys that are not available on the
front panel. For details see the user manual or the help system.
BACK
●
Deletes the character to the left of the cursor.
●
Navigates back in the tree pane.
OK
●
Displays the next menu level.
●
Activates the editing mode for the selected numeric/alphanumeric parameter.
●
Completes the data entry.
The new value is accepted. For numeric parameters, the unit is also displayed.
●
Switches the marked status parameters on/off (State On/Off).
●
Confirms (OK) and closes message windows.
RF ON/OFF
Switches the RF output on or off.
LOCAL
Switches from remote control or remote operation (e.g. using Remote Desktop) to
manual operation (using the front panel).
5.1.2
Status Display LEDs
See (2) in
Figure 5-1 or (1) in Figure 5-2.
The basic state is indicated by LEDs.
RF ON
Displays the status of the RF output.
●
LED off: RF output is switched off.
●
LED green: RF output is switched on.
POWER
Displays the power supply status.
●
LED off: No power is supplied. R&S SFE100 is switched off.
●
LED green: Power is supplied.
REMOTE
Displays the remote control status.
●
LED off: R&S SFE100 is not used for remote control.
Front Panel
To Next Page
Loading...
