Rohde & Schwarz R&S SFE100 - USB Interface; Ref in; 1 Pps; Trig; Rf out

Interfaces and Connectors
R&S
®
SFE100
26Getting Started 2112.4122.62 ─ 13
Line pairs have a name that only differs in the last character. For example, the pins 1
and 14 are a pair.
5.2.8 USB Interface
USB interface (universal serial bus) type A (host USB). For details see Chapter 5.1.6,
"USB Interfaces"
, on page 20.
5.2.9 REF IN
BNC connector. Used to input the reference frequency.
For further details see user manual or the help system.
5.2.10 1PPS / TRIG
BNC connector. Input for the 1 pulse per second signal used in SFN modes.
Input for external triggering of digital modulations standards and ARB.
5.2.11 RF OUT
Requires the power amplifier option (R&S SFE100-B90). For details see Chapter 5.1.5,
"RF OUT", on page 19.
Rear Panel
深圳德标仪器 135-1095-0799