Sample Application
R&S
®
SFE100
42Getting Started 2112.4122.62 ─ 13
2. Using the UPARROW/DNARROW keys, select the "FREQUENCY" menu.
3. Press the OK
or RIGHTARROW key.
The tree is expanded and the "FREQUENCY" submenu is displayed.
4. Select the "FREQUENCY" submenu and confirm your entry with OK.
The work view is displayed.
5. Using the UPARROW/DNARROW keys, select the "FREQUENCY" field.
6. Using the LEFTARROW/RIGHTARROW keys, move the cursor to the digit you
want to change in the frequency entry.
7.
Using the UPARROW/DNARROW keys, change the numeric value to 330
MHz.
8. Press OK to confirm your entry.
9. Press the BACK key to exit the work view and get back to the tree.
Setting the output level
1. Using the UPARROW/DNARROW keys, select the "LEVEL" menu.
2. Press the OK or RIGHTARROW key.
The tree is expanded and the "LEVEL" submenu is displayed.
3. Select the "LEVEL" submenu and confirm your entry with OK.
The work view is displayed.
4. Using the UPARROW/DNARROW keys, select the "LEVEL" field.
5. Using the LEFTARROW/RIGHTARROW keys, move the cursor to the digit you
want to change in the frequency entry.
6.
Using the UPARROW/DNARROW keys, change the numeric value to -20
dBm.
Using Display and Keys on the Front Panel
To Next Page
Loading...
