Rohde & Schwarz R&S SFE100 - Page 73

Installed Software
R&S
®
SFE100
54Getting Started 2112.4122.62 ─ 13
1. In the "Windows XP Embedded Recovery and Backup Partition" dialog (see "To
display the Windows XP Embedded Recovery and Backup Partition dialog"
on page 51
), click "Make Backup".
The "Make Backup" dialog is displayed. It shows the current versions of the firm-
ware and the software platform.
2. Click "Make Backup".
After the backup, the "Windows XP Embedded Recovery and Backup Partition"
dialog is displayed again.
3.
Click "Exit and Shutdown"
.
4. Turn off/on the R&S SFE100 manually.
10.3.3.2 Recovering the Selected Version of System Partition
Only R&S SFE100 models 12, 13.
1. In the "Windows
XP Embedded Recovery and Backup Partition" dialog (see "To
display the Windows XP Embedded Recovery and Backup Partition dialog"
on page 51), click "Restore Backup" to recover a selected version of the system
partition.
The "Restore Backup" dialog is displayed. It shows the versions of the firmware
and the software platform of the backup displayed under "Select Backup".
Windows XP Recovery and Backup Partition
深圳德标仪器 135-1095-0799