Signal generator settings
R&S
®
SGS100A
108User Manual 1173.9105.02 ─ 13
"Delete Range..."
Allows you to delete any number of rows starting with the marked
row. The number of rows to be deleted can be defined in an entry
window.
"Save as"
Open the file menu to save the list under a new name.
Note: Save list only after filling both columns (frequency and level),
otherwise the entries are lost.
Each list is saved to the R&S SGS hard disk as a separate file with
the file prefix *.uco. The file name and the directory to which the file
is saved are user-selectable.
"Save"
The list is saved under its current name.
Remote command:
[:SOURce<hw>]:CORRection:CSET[:SELect] on page 268
[:SOURce<hw>]:CORRection:CSET:DATA:FREQuency on page 262
[:SOURce<hw>]:CORRection:CSET:DATA:POWer on page 263
Import/Export >>>
Expands the menu with the area for import and export of user correction files.
Externally edited Excel tables with any number of frequency/level value pairs can be
imported as text or *.csv files and used for user correction.
Conversely, you can also export internally created user correction lists as text or
*.csv files.
Mode
Selects the mode to import or export user correction lists. The settings depend on the
selected mode.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:MODE on page 267
Extension
Selects the file extension of the ASCII file to be imported or exported. Selection "TXT"
(text file) or "CSV" (Excel file) is available.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension on page 265
Decimal Point
Selects the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
Level and power-on settings
To Next Page
Loading...
