General instrument settings and instrument setup
R&S
®
SGS100A
150User Manual 1173.9105.02 ─ 13
└ LAN Interface................................................................................................151
└ Security Password........................................................................................ 151
└ Accept...........................................................................................................151
User Password
The user name and password are required for remote access to the instrument via
VNC, FTP or SAMBA.
Note: It is highly recommended to change the default user password before connect-
ing the instrument to the network.
Note: Note that you cannot reset the password to factory state.
If you encounter problems with the password, contact the Rohde & Schwarz customer
support, see Chapter 14.5, "Contacting customer support", on page 312.
User Name ← User Password
Indicates the user name used for access to the Linux operating system and valid for
VNC, FTP and SAMBA access.
Old Password ← User Password
Enter the currently used user password. The default password is "instrument".
New Password ← User Password
Enter the new user password.
Confirm Password ← User Password
Enter the new password for conformation.
The new password is only valid after the "Change Password" button is pressed.
Change Password ← User Password
Changes the password accordingly.
Security Password
The security password is, for example, required when changing the status of the USB
and LAN interface or other security settings.
Note: It is highly recommended to change the default security password before con-
necting the instrument to the network.
Note: Note that you cannot reset the password to factory state.
If you encounter problems with the password, contact the Rohde & Schwarz customer
support, see Chapter 14.5, "Contacting customer support", on page 312.
Old Password ← Security Password
Enter the currently used security password. The default password is '123456'.
New Password ← Security Password
Enter the new security password. The security password can only contain decimal
characters.
Confirm Password ← Security Password
Enter the new password for conformation.
Security
To Next Page
Loading...
