Rohde & Schwarz R&S SGS100A - Page 152

General instrument settings and instrument setup
R&S
®
SGS100A
152User Manual 1173.9105.02 ─ 13
Access:
► Select "SGMA-GUI > Instrument Name > Setup > Network Settings".
The dialog provides access to the network settings, like settings about the general net-
work environment and specific identification of the computer in the network. The dialog
also displays an indication whether the instrument is connected to the network or not.
Settings
Restart Network.......................................................................................................... 152
Hostname....................................................................................................................152
MAC Address..............................................................................................................153
Address Mode.............................................................................................................153
IP Address...................................................................................................................153
Subnet Mask............................................................................................................... 153
Default Gateway..........................................................................................................154
Apply........................................................................................................................... 154
Restart Network
Shuts down the network connection of the instrument and then re-establishes the con-
nection.
This function can be used to resolve network problems.
Note: Only the connection of the instrument to the network restarts, the network itself
is not affected.
Hostname
Displays the individual computer name of the instrument.
Network settings