Rohde & Schwarz R&S SGS100A - Page 204

Network operation and remote control
R&S
®
SGS100A
204User Manual 1173.9105.02 ─ 13
It comprises the following navigation entries.
● IP configuration..................................................................................................... 204
● Advanced Config...................................................................................................204
● Ping client..............................................................................................................205
● SCPI remote trace.................................................................................................206
12.6.3.1 IP configuration
The "IP configuration" web page displays all mandatory LAN parameters and allows
their modification.
The "IP Address Mode" selects a configuration mode for the IP address of the instru-
ment. With static configuration, the entered IP address, subnet mask, and default gate-
way are used. With dynamic configuration via DHCP or dynamic link local addressing
(automatic IP), the instrument IP address is assigned automatically.
Password protection
Changing the LAN configuration is password protected and requires the security pass-
word. The default password is "instrument".
12.6.3.2 Advanced Config
The "Advanced Config" web page provides LAN settings that are not declared manda-
tory by the LXI standard.
LXI configuration