Rohde & Schwarz R&S SGS100A - Page 242

Remote control commands
R&S
®
SGS100A
242User Manual 1173.9105.02 ─ 13
Setting parameters:
<SourceFile> string
String parameter to specify the name of the file to be moved.
<DestinationFile> string
String parameters to specify the name of the new file.
Example: See "Working with Files and Directories" on page 236.
Usage: Event
SCPI confirmed
:MMEMory:MSIS
<Msis>
Defines the drive or network resource (in the case of networks) for instruments with
windows operating system, using msis (MSIS = Mass Storage Identification String).
Note: Instruments with Linux operating system ignore this command, since Linux does
not use drive letter assignment.
Usage:
SCPI confirmed
:MMEMory:RDIRectory <Directory>
Removes an existing directory from the mass memory storage system. If no directory
is specified, the subdirectory with the specified name is deleted in the default directory.
Setting parameters:
<Directory> string
String parameter to specify the directory to be deleted.
Example: See "Working with Files and Directories" on page 236.
Usage: Event
:MMEMory:STORe:STATe <savrcl_state_nr>, <file_name>
Stores the current instrument setting in the specified file.
The instrument setting must first be stored in an internal memory with the same num-
ber using the common command *SAV.
Setting parameters:
<savrcl_state_nr> Corresponds to the specific <number> defined with the *SAV
command, e.g. *SAV 4.
<file_name> String parameter to specify the file name with extension
*.savrcltxt.
Example: See "Storing and Loading Current Settings" on page 236.
Usage: Event
MMEMory subsystem