Rohde & Schwarz R&S SGS100A - Page 265

Remote control commands
R&S
®
SGS100A
265User Manual 1173.9105.02 ─ 13
Example:
MMEM:CDIR '/var/sgs/import'
selects the directory for the ASCII files with frequency and level
value pairs.
CORR:DEXC:AFIL:EXT TXT
selects that ASCII files with extension *.txt are listed.
CORR:DEXC:AFIL:CAT?
queries the available files with extension *.txt.
Response: 'ucor1,ucor2'
the ASCII files ucor1.txt and ucor2.txt are available.
Usage: Query only
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension
<Extension>
Selects the file extension of the ASCII file to be imported or exported. Selection TXT
(text file) or CSV (Excel file) is available.
Parameters:
<Extension> TXT | CSV
*RST: TXT
Example:
MMEM:CDIR '/var/sgs/import'
selects the directory for the ASCII files with frequency and level
value pairs.
CORR:DEXC:AFIL:EXT TXT
selects that ASCII files with extension *.txt are listed.
CORR:DEXC:AFIL:CAT?
queries the available files with extension *.txt.
Response: 'list1,list2'
the ASCII files ucor1.txt and ucor2.txt are available.
Manual operation: See "Extension" on page 108
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect <Filename>
Selects the ASCII file to be imported or exported.
The ASCII files are stored with the fixed file extensions *.txt or *.csv in a directory
of the user's choice. The directory applicable to the commands is defined with the com-
mand MMEMory:CDIR. A path can also be specified in command
SOUR:CORR:DEXC:AFIL:SEL, in which case the files are stored or loaded in the
specified directory.
Parameters:
<Filename> <ascii file name>
SOURce:CORRection subsystem