Rohde & Schwarz R&S SGS100A - System:hardware:assembly<Dir>:Name; System:hardware:assembly<Dir>:Pnumber; System:protect<Ch>[:State]

Remote control commands
R&S
®
SGS100A
298User Manual 1173.9105.02 ─ 13
Example:
SYST:STAR:COMP?
// 1
// the startup of the instrument is completed
Usage: Query only
:SYSTem:PROTect<ch>[:STATe] <State>[, <Key>]
Activates and deactivates the specified protection level.
Suffix:
<ch>
.
Indicates the protection level.
Parameters:
<State> select
*RST: n.a. (factory preset: 1)
Setting parameters:
<Key> integer
The respective functions are disabled when the protection level
is activated. No password is required for activation of a level. A
password must be entered to deactivate the protection level.
The password for the first level is 123456.
Example:
// to activate protection level
SYSTem:PROTect1:STATe 1
// internal adjustments or hostname cannot be changed
// to unlock protection level 1
SYSTem:PROTect1:STATe 0,123456
// internal adjustments are accessible
:SYSTem:HARDware:ASSembly<dir>:NAME?
The query returns a list of hardware assembly names.
Suffix:
<dir>
.
1..2
Defines the section: 1 = common assembly, 2 = RF assembly.
Return values:
<Name> string
Example: See Chapter 13.1.1, "Performing general tasks for instrument
setup", on page 213.
Usage: Query only
Manual operation: See " Assembly" on page 144
:SYSTem:HARDware:ASSembly<dir>:PNUMber?
The query returns the list of hardware module part numbers.
SYSTem subsystem