Understanding the R&S SGMA-GUI software
R&S
®
SGS100A
69User Manual 1173.9105.02 ─ 13
Protection Level / Password
"Protection Level 1" can be activated to expand the functionality of the internal adjust-
ment. The password is 123456.
The other protection levels 2 to 4 provide access to protected service functions. Only
the authorized personnel of Rohde & Schwarz service departments can access these
functions.
8.1.2.6 Remote
Access: "SGMA-GUI > Setup > Remote".
SCPI Port
Sets the port number of the LAN interface for remote control with TCP/IP socket proto-
col.
Set different port numbers to control different software from the same application, e.g.
R&S SGMA-GUI and R&S WinIQSIM2.
Remote command:
:SYSTem:COMMunicate:SOCKet:PORT on page 296
8.1.3 Help
The R&S SGMA-GUI is equipped with a context-sensitive help function. A help page
can be called anytime during software operation.
The context-sensitive page which is opened with the [F1] key is part of a comprehen-
sive help system.
It is possible to move from this context-sensitive page to any page of the help system.
An overview of the contents of the online help can be reached via the menu "SGMA-
GUI > Help > Contents".
A search for keywords within the help function is available via menu item "SGMA-GUI
> Help > Index".
8.2 Info dialog and messages in the info bar
A few operating states and the current messages are displayed in the info line. For
information on messages in greater detail and their management, an "Info" dialog can
be opened.
Info dialog and messages in the info bar
To Next Page
Loading...
