Rohde & Schwarz R&S SGS100A - Finding out the Default Hostname of the Instrument

Understanding the R&S SGMA-GUI software
R&S
®
SGS100A
78User Manual 1173.9105.02 ─ 13
The two functions "Exclusive Access" and monitoring are mutually exclusive.
The "Exclusive Access" must be disabled to remote control or monitor the instrument
form another external PC (see Chapter 12.7, "Monitoring remote control operation with
R&S SGMA-GUI", on page 209).
8.4.2.6 How to edit instruments
1. In the R&S SGMA-GUI main panel, select "Setup > Instruments".
The Configure Instruments dialog opens and lists the "Available Instruments".
2. Select the instrument, that you want to edit.
3. Click the "Edit" key.
The Edit Instrument dialog opens.
4. Change the settings.
5. Confirm with "Ok".
The edited settings are applied.
8.4.2.7 How to delete an instrument
1. In the R&S SGMA-GUI main panel, select "Setup > Instruments".
The Configure Instruments dialog opens.
2. Select the instrument, that you want to delete.
3. Click the "Delete" key.
The selected instrument is deleted from the list of "Available Instruments".
8.4.2.8 How to delete all instruments
1. In the R&S SGMA-GUI main panel, select "Setup > Instruments".
The Configure Instruments dialog opens.
2. Click the "Clear" key.
All instruments are deleted from the list of "Available Instruments".
8.4.3 Finding out the default hostname of the instrument
The default hostname of the instrument is a non-case-sensitive string built as follows:
●
hostname = <instrument name><serial number>
●
<serial number> is the individual serial number of the instrument.
Working with R&S SGMA-GUI