Rohde & Schwarz R&S SGS100A - Instruments:remote:name; Instruments:scan; Instruments:scan:hnprefix; Instruments:scan:snet:ipaddress

Understanding the R&S SGMA-GUI software
R&S
®
SGS100A
88User Manual 1173.9105.02 ─ 13
Parameters:
<Channel> List of CHAR-Data
<Channellnstr#1>,<Channellnstr#2>,...
The available interfaces are: LAN, USB, SOCKET, PCIe, GPIB,
HiSLIP
Example: See Example "Searching for SGMA instruments" on page 84.
Manual operation: See "Hardware Channel" on page 66
:INSTruments:REMote:NAME <Name>
Enters the IP Address or the host name of the connected instrument.
Parameters:
<Name> <Hostname/IP-AddressInsr#1>,<Hostname/IP-Addres-
sInsr#2>,...
Example: See Example "Searching for SGMA instruments" on page 84.
Manual operation: See "Instrument Name / IP Address" on page 66
:INSTruments:SCAN <State>
Triggers a scan function and searches for instruments connected to the remote com-
puter via all of the available interfaces.
Parameters:
<State> number
1 = triggers the scan function, 0 = aborts the running scan proc-
ess
The query command returns 1 as long as scan is running; 0 indi-
cates completed scan process.
Example: See Example "Searching for SGMA instruments" on page 84.
Manual operation: See "Scan" on page 63
:INSTruments:SCAN:HNPRefix <Prefix>
Sets the prefix the searched host names begin with.
Parameters:
<Prefix> string
Example: See Example "Searching for SGMA instruments" on page 84.
Manual operation: See "Scan LAN instruments with host name prefix" on page 64
:INSTruments:SCAN:SNET:IPADdress <Address>
Sets the IP address of an instrument within a subnet.
Remote control of R&S SGMA-GUI