Network operation and remote control
R&S
®
SMB100B
337User Manual 1178.3711.02 ─ 08
3. To check the progress of the recording, select "Context-Sensitive > Show SCPI
Recording List".
The "SCPI Recording List" dialog opens, displaying all recorded settings so far.
4. Proceed with How to check a SCPI list.
How to create a SCPI list with the current instrument settings in one step
You can also generate a SCPI list from a manually created instrument state at any
time, in only one step.
To generate a SCPI list with commands for all settings performed:
1. Select "Save/Recall > SCPI Export".
The instrument opens the standard file select dialog, see Chapter 9.4.1, "Save/
recall settings", on page 202.
2. In the "Format" entry field, select the source code.
3. Depending on the selected format, convert the script as described in Chap-
ter 11.13.5, "How to convert and save SCPI lists", on page 338
4. Enter a filename.
5. Select "Export".
The instrument writes all SCPI commands of the key parameters and the modified
settings in the file. Also assigns the file extension automatically according to the
source code format.
6. To preview the content of the SCPI list:
a) Select "System Config > Save/Recall".
b) Select "Operation Mode > SCPI-Export".
To automate tasks with remote command scripts
To Next Page
Loading...
