Rohde & Schwarz R&S SMW200A - Page 1009

Remote Control Commands
R&S
®
SMW200A
1009User Manual 1175.6632.02 ─ 30
Parameters:
<ExtTimeDelay> float
Range: 0 to 7929.170398682
Increment: 0.25E-9
*RST: 0
Default unit: s
Example: See Example "Specifying delay and inhibit values in time units"
on page 1022.
Manual operation: See "(Specified) External Delay/(Specified) Trigger Delay"
on page 255
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:RDELay?
Queries the time (in seconds) an external trigger event is delayed for.
Return values:
<ResTimeDelaySec> float
Range: 0 to 688
Increment: 0.25E-9
*RST: 0
Example: See Example "Specifying delay and inhibit values in time units"
on page 1022
Usage: Query only
Manual operation: See "Actual Trigger Delay/Actual External Delay" on page 256
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:INHibit <Inhibit>
Specifies the number of symbols, by which a restart is inhibited.
Maximum trigger delay and trigger inhibit values depend on the installed options. See
"Specifying delay and inhibit values" on page 242.
Parameters:
<Inhibit> integer
Range: 0 to 21.47 * (symbol rate)
*RST: 0
Default unit: symbol
E.g. 0 to 2147483647 symbols (R&S SMW-B10)
Example: See Example "Adjusting clock, marker and trigger settings"
on page 990.
Manual operation: See "External / Trigger Inhibit" on page 255
SOURce Subsystem