Rohde & Schwarz R&S SMW200A - Page 1033

Remote Control Commands
R&S
®
SMW200A
1033User Manual 1175.6632.02 ─ 30
Manual operation: See "Generate Signal RAM" on page 308
See "Generate Signal RAM" on page 309
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:AWGN:SAMPles <ParAwgnSamp>
Sets the number of samples generated for the AWGN waveform.
Parameters:
<ParAwgnSamp> integer
Range: 1E6 to 1E9
*RST: 1E8
Example: See Example "Generating AWGN test signal" on page 1028.
Options: R&S SMW-K811
Manual operation: See "Samples" on page 351
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:AWGN:CREate
Generates a signal and uses it as output straight away.
Example:
See Example "Generating AWGN test signal" on page 1028.
Usage: Event
Options: R&S SMW-K811
Manual operation: See "Generate Signal RAM" on page 351
Waveform Commands
The following rule applies for all commands described in this section.
By default, the waveform files are saved in the default directory of the instrument, that
is the /var/user/ directory or the directory specified with the command :MMEMory:
CDIRectory. To access the waveform files in this default directory, only the file name
is required, without the path and the file extension (*.wv).
However, to access waveform files located in a directory different to the default one,
the complete file path and file name are required.
[:SOURce<hw>]:BB:ARBitrary:WAVeform:CATalog?........................................................ 1034
[:SOURce<hw>]:BB:ARBitrary:WAVeform:CATalog:LENGth?............................................1034
[:SOURce<hw>]:BB:ARBitrary:WAVeform:SELect............................................................1034
[:SOURce<hw>]:BB:ARBitrary:WAVeform:DELete........................................................... 1034
[:SOURce<hw>]:BB:ARBitrary:WAVeform:FREE?............................................................1035
[:SOURce<hw>]:BB:ARBitrary:WAVeform:POINts?..........................................................1035
[:SOURce<hw>]:BB:ARBitrary:WAVeform:DATA..............................................................1035
[:SOURce<hw>]:BB:ARBitrary:WAVeform:TAG?..............................................................1036
[:SOURce<hw>]:BB:ARBitrary:CLOCk........................................................................... 1036
SOURce Subsystem