Rohde & Schwarz R&S SMW200A - Page 1040

Remote Control Commands
R&S
®
SMW200A
1040User Manual 1175.6632.02 ─ 30
Parameters:
<Source> INTernal | NSEGM1 | INTernal | NSEGM1 | NSEGM2
*RST: INTernal
Example: See Example "Configuring the output order of the segments"
on page 1024.
Manual operation: See "Next Segment Source" on page 372
[:SOURce<hw>]:BB:ARBitrary:WSEGment:LMODe <LevelMode>
Sets how the segments are leveled.
Parameters:
<LevelMode> HIGHest | UNCHanged
*RST: HIGHest
Example:
:SOURce1:BB:ARBitrary:WSEGment:LMODe HIGHest
Manual operation: See "Level Mode" on page 372
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:CATalog?
Queries the segments of the currently selected configuration file.
Return values:
<Catalog> string
Example: See Example "Creating a multi-segment waveform"
on page 1022.
Usage: Query only
Manual operation: See "Multi Segment Table" on page 362
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:SELect <Filename>
Selects the sequencing list (files with extension *.wvs)
Parameters:
<Filename> string
Example: see Example "Using the ARB sequencer" on page 1025
Manual operation: See "New/Load Sequencing List" on page 367
See "Append" on page 369
See "Sequencing List" on page 372
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:APPend <State>,
<Segment>, <Count>, <Next>
Appends a new segment to the selected sequencing play list.
SOURce Subsystem