Signal Routing and System Configuration
R&S
®
SMW200A
115User Manual 1175.6632.02 ─ 30
●
The Figure 4-1 shows the digital interfaces on the rear panel together with the
associated GUI term (highlighted in orange color).
Figure 4-1: Location of the digital input and output interfaces (part view of the rear panel of a
fully equipped instrument, standard baseband)
Figure 4-2: Location of the digital input and output interfaces (part view of the rear panel, wide-
band baseband)
●
The Figure 4-3 shows the analog output interfaces on the rear panel together with
the associated GUI term (highlighted in orange color).
Figure 4-3: Location of the analog output interfaces (part view of the rear panel of a fully equip-
ped instrument, standard baseband)
Overview of the Input and Output Signals and Interfaces
To Next Page
Loading...