Rohde & Schwarz R&S SMW200A - Page 1175

Remote Control Commands
R&S
®
SMW200A
1175User Manual 1175.6632.02 ─ 30
[:SOURce<hw>]:LIST:CATalog?..................................................................................... 1175
[:SOURce<hw>]:LIST:DELete........................................................................................1175
[:SOURce<hw>]:LIST:DELete:ALL................................................................................. 1175
[:SOURce<hw>]:LIST:FREE?........................................................................................ 1176
[:SOURce<hw>]:LIST:RESet......................................................................................... 1176
[:SOURce<hw>]:LIST:SELect........................................................................................ 1176
[:SOURce<hw>]:LIST:CATalog?
Queries the available list files in the specified directory.
Return values:
<Catalog> string
List of list filenames, separated by commas
Example: See Example "Create an RF list and activate the list mode"
on page 1165.
Usage: Query only
Manual operation: See "List Mode Data" on page 521
[:SOURce<hw>]:LIST:DELete <Filename>
Deletes the specified list.
Setting parameters:
<Filename> string
Filename or complete file path; file extension is optional.
Example: See [:SOURce<hw>]:LIST:DELete:ALL on page 1175.
Usage: Setting only
Manual operation: See "List Mode Data" on page 521
[:SOURce<hw>]:LIST:DELete:ALL
Deletes all lists in the set directory.
This command can only be executed, if:
●
No list file is selected.
●
List mode is disabled.
SOURce Subsystem