Rohde & Schwarz R&S SMW200A - Page 1176

Remote Control Commands
R&S
®
SMW200A
1176User Manual 1175.6632.02 ─ 30
Example:
SOUR1:LIST:CAT?
// list,my_list
SOUR1:LIST:DEL "/var/user/list1"
SOUR1:LIST:CAT?
// my_list
SOUR1:FREQ:MODE?
// LIST
SOUR1:LIST:SEL?
// /var/user/my_list.lsw
//deactivate list mode
SOUR1:FREQ:MODE CW
SOUR1:LIST:DELete:ALL
SOUR1:LIST:CAT?
// -
// all list files are deleted
Usage:
Event
Manual operation: See "List Mode Data" on page 521
[:SOURce<hw>]:LIST:FREE?
Queries the amount of free memory (in bytes) for list mode lists.
Return values:
<Free> integer
Range: 0 to INT_MAX
*RST: 0
Example: See Example "Create an RF list and activate the list mode"
on page 1165.
Usage: Query only
[:SOURce<hw>]:LIST:RESet
Jumps to the beginning of the list.
Example:
See Example "Create an RF list and activate the list mode"
on page 1165.
Usage: Event
Manual operation: See "Reset" on page 520
[:SOURce<hw>]:LIST:SELect <Filename>
Selects or creates a data list in list mode.
If the list with the selected name does not exist, a new list is created.
SOURce Subsystem