Rohde & Schwarz R&S SMW200A - Page 1232

Remote Control Commands
R&S
®
SMW200A
1232User Manual 1175.6632.02 ─ 30
Return values:
<Resource> string
Example: See Example "Finding out the used VISA ressource strings"
on page 1217.
Usage: Query only
:SYSTem:COMMunicate:SERial:SBITs <SBits>
Defines the number of stop bits for the serial remote control interface.
Parameters:
<SBits> 1 | 2
*RST: n.a. (factory preset: 1)
Example: See Example "Finding out the used VISA ressource strings"
on page 1217.
Manual operation: See "Stop Bits" on page 790
:SYSTem:COMMunicate:SOCKet:RESource?
Queries the visa resource string for remote control via LAN interface, using TCP/IP
socket protocol.
Return values:
<Resource> string
Example: See Example "Finding out the used VISA ressource strings"
on page 1217.
Usage: Query only
:SYSTem:COMMunicate:USB:RESource?
Queries the visa resource string for remote control via the USB interface.
Return values:
<Resource> string
Example: See Example "Finding out the used VISA ressource strings"
on page 1217.
Usage: Query only
:SYSTem:HELP:EXPort
Saves the online help as zip archive in the user directory.
SYSTem Subsystem