Rohde & Schwarz R&S SMW200A - Page 1265

Troubleshooting and Error Messages
R&S
®
SMW200A
1265User Manual 1175.6632.02 ─ 30
You can download firmware updates and the "Release Notes" that describe the modifi-
cations and the firmware update procedure.
See www.rohde-schwarz.com/firmware/smw200a
Remote command:
n.a.
Downgrade Info
Shows downgrade information, like factory firmware version and minimum firmware
version to that the instrument can be downgraded.
Remote command:
n.a.
Show Open Source Acknowledgments
Accesses the list of the used open-source software packages and the corresponding
verbatim license texts.
Hardware Options/Software Options
The tables in the "Hardware" and "Software" tabs list the installed hardware and soft-
ware options.
"Option"
Short name of option
"Designation"
Name of option
"Licenses"
(optional)
Number of licenses.
The licenses for the software options are "floating licenses". In the
case of two-path instruments, just one license is required to use the
option for either of the two paths. However, two licenses must be pur-
chased to use an option on both paths simultaneously.
"Expiration Date"
For regular options, "Permanent" is indicated in this column. Some
options are available as trial versions. This column shows their expi-
ration date. After this date, the option is no longer available on the
instrument.
Remote command:
*OPT? on page 846
*IDN? on page 845
Versions
The "Versions" tab shows the versions of the technical specification of the R&S SMW
and of the software components that comprise the firmware.
"Package"
Name of the component.
"Version"
Current issue of the component.
E.g. the data sheet covers the technical data of the hardware compo-
nents of the factory settings.
See also "Data Sheet" on page 802.
Remote command:
:SYSTem:SPECification:VERSion:FACTory? on page 1237
Requesting Instrument Configuration and Specifications