Rohde & Schwarz R&S SMW200A - Generating Signals According to Digital Standards

Configuring the Internal Baseband Source
R&S
®
SMW200A
220User Manual 1175.6632.02 ─ 30
The designation "Digital I/Q In" indicates that the instrument uses the external digi-
tal baseband signal, see Chapter 4.6, "Digital Baseband Input Settings",
on page 158.
For information, see:
● Chapter 5.6, "Generating Custom Digital Modulated Signals", on page 261
● Chapter 5.7, "Using the Arbitrary Waveform Generator (ARB)", on page 296
● Chapter 5.12, "Generating Multi-Carrier Continuous Wave Signal", on page 398
● The description of the digital standards
● Chapter 5.14, "Shifting and Boosting the Baseband Signal", on page 408
5.4 Generating Signals According to Digital Standards
The R&S SMW generates digital signals in accordance with the specifications of the
main communication and radio standards only if the corresponding firmware options
are installed.
This section lists the supported standard-compliant digital signals, that run on the stan-
dard baseband or wideband baseband generator.
The following standards do not run on the wideband baseband generator (option
R&S SMW-B9):
●
"IEEE 802.16 WiMAX
TM
" on page 223
●
"NFC/EMV" on page 223
GSM/EDGE, EDGE Evolution
This digital standard requires an instrument equipped with the GSM/EDGE and EDGE
Evolution options R&S SMW-K40/-K41.
The GSM/EDGE, EDGE Evolution options provide functionality to generate signals in
accordance with the GSM/EDGE standard. GSM/EDGE signals comprise GMSK and
8PSK modulation and higher order modulations, that are in accordance with the EDGE
Evolution standard, with simulation of .
For details, see the R&S SMW GSM/EDGE user manual.
Bluetooth
®
Enhanced Data Rate/Bluetooth
®
5.x
This digital standard requires an instrument equipped with options Blue-
tooth
®
Enhanced Data Rate (EDR) and Bluetooth
®
5.x R&S SMW-K60/-K117.
The Bluetooth
®
options provide functionality to generate signals in accordance with the
Bluetooth
®
core specification for Bluetooth
®
EDR and Bluetooth
®
5.x. For the latest ver-
sion of Bluetooth
®
5.x, see the latest Bluetooth
®
core specification document.
For details, see the R&S SMW Bluetooth Enhanced Data Rate, Bluetooth 5.x user
manual.
Generating Signals According to Digital Standards