Rohde & Schwarz R&S SMW200A - Page 256

Configuring the Internal Baseband Source
R&S
®
SMW200A
256User Manual 1175.6632.02 ─ 30
Use the settings to:
●
Synchronize the instrument with the device under test (DUT) or other external devi-
ces
●
Postpone the signal generation start in the basebands compared to each other
●
Compensate for signal delay and align the signals in time
For more information, see:
●
"Impact of the Additional Trigger Settings" on page 240
●
"Specifying delay and inhibit values" on page 242
The parameter Actual Trigger Delay/Actual External Delay displays the delay conver-
ted in time.
Remote command:
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:DELay on page 1008
[:SOURce<hw>]:BB:DM:TRIGger:OBASeband:DELay on page 1006
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:TDELay on page 1008
[:SOURce<hw>]:BB:DM:TRIGger:OBASeband:TDELay on page 1007
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:DELay on page 1065
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OBASeband:DELay on page 1064
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:TDELay on page 1066
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OBASeband:TDELay on page 1065
[:SOURce<hw>]:BB:MCCW:TRIGger[:EXTernal]:DELay on page 1085
[:SOURce<hw>]:BB:MCCW:TRIGger:OBASeband:DELay on page 1083
Actual Trigger Delay/Actual External Delay
Displays the time (in seconds) an external trigger event or a trigger event form the
other path is delayed with.
See also "Specifying delay and inhibit values" on page 242.
Remote command:
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:RDELay? on page 1009
[:SOURce<hw>]:BB:DM:TRIGger:OBASeband:RDELay? on page 1007
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:RDELay? on page 1066
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OBASeband:RDELay? on page 1064
5.5.2.2 Marker Settings
Access:
► Select "Baseband > Custom Dig Mod > Marker".
This tab provides access to the settings necessary to select and configure the marker
output signal, like the marker mode or marker delay settings.
Common Functions and Settings in the Baseband Domain