Getting Started
R&S
®
SMW200A
29User Manual 1175.6632.02 ─ 30
Left = Stacked correctly, same dimensions
Middle = Stacked correctly, different dimensions
Right = Stacked incorrectly, too many products
4.
NOTICE! Overheating can damage the product.
Prevent overheating as follows:
● Keep a minimum distance of 10 cm between the fan openings of the product
and any object in the vicinity.
● Do not place the product next to heat-generating equipment such as radiators
or other products.
3.1.4.2 Mounting the R&S SMW in a Rack
To prepare the rack
1. Observe the requirements and instructions in "Setting up the product" on page 20.
2.
NOTICE! Insufficient airflow can cause overheating and damage the product.
Design and implement an efficient ventilation concept for the rack.
To mount the R&S SMW in a rack
1. Use an adapter kit that fits the dimensions of the R&S SMW to prepare the instru-
ment for rack mounting.
a) Order the rack adapter kit designed for the R&S SMW. For the order number,
see data sheet.
b) Mount the adapter kit. Follow the assembly instructions provided with the
adapter kit.
2.
WARNING! The R&S SMW can be heavy, e.g., if fully equipped. Use a lifting
equipment, see also "Lifting and carrying the product" on page 19.
Lift the R&S SMW to shelf height.
3. Grab the handles at the front and push the R&S SMW onto the shelf until the rack
brackets fit closely to the rack.
Preparing for Use
To Next Page
Loading...