Configuring the Internal Baseband Source
R&S
®
SMW200A
316User Manual 1175.6632.02 ─ 30
a) Select "Link Direction > Downlink (OFDMA)"
b) Select a predefined test model, "Test Models > E-TM1_1__10MHz"
3. Enable "EUTRA/LTE/IoT > State > On".
The R&S WinIQSIM2 calculates the signal and displays important signal parame-
ters, like the used "Sample Rate" and "Number of Samples".
Using the Arbitrary Waveform Generator (ARB)
To Next Page
Loading...