Configuring the Internal Baseband Source
R&S
®
SMW200A
319User Manual 1175.6632.02 ─ 30
+1.0. The data is converted into binary format. The appropriate mandatory tags are
added and the data is packed into the WAVEFORM tag. As result, the waveform file
SICO.wv is generated.
This example follows the general principle of creating of a waveform manually, using
the tag file format. The Figure 5-17 illustrates this general workflow.
Figure 5-17: Principle of creating a waveform manually
The following steps outline how to create the waveform file SICO.wv:
1. Calculate the sine and cosine values, e.g. use the SICO.cpp program.
The result is saved in the file SICO.txt.
Figure 5-18: Contents of SICO.txt: first column Sine (I), second column Cosine (Q)
Using the Arbitrary Waveform Generator (ARB)
To Next Page
Loading...