Configuring the Internal Baseband Source
R&S
®
SMW200A
330User Manual 1175.6632.02 ─ 30
{COMMENT: string}
The tag contains a plain text ASCII string of arbitrary length. The string is not analyzed
in the R&S SMW. It is used to describe the file. The string is allowed to contain all print-
able ASCII characters except the closing curly bracket.
Example:
{COMMENT: File with data for 3GPP enhanced
channels}
BB:ARB:WAV:TAG? 'COMMENT'
Queries the content of the COMMENT tag of the selected wave-
form file.
Response: 'File with data for 3GPP enhanced
channels'
The comment on the waveform reads "File with data for 3GPP
enhanced channels".
Usage: Setting only
{COPYRIGHT: string}
The tag contains an ASCII string of arbitrary length. The string is not analyzed in the
R&S SMW. It is used to save copyright information about the file content.
Example:
{COPYRIGHT: Rohde&Schwarz}
BB:ARB:WAV:TAG? 'COPYRIGHT'
Queries the content of the COPYRIGHT tag of the selected wave-
form file.
Response: 'Rohde&Schwarz'
Copyright resides with Rohde & Schwarz.
Usage: Setting only
{DATE: yyyy-mm-dd;hh:mm:ss}
(optional)
The tag contains the date and time at which the file was created. The year must be
expressed as four digits. The instrument does not analyze this tag.
Example:
{DATE: 2009-04-02;14:32:12}
BB:ARB:WAV:TAG? 'DATE'
Queries the content of the DATE tag of the selected waveform
file.
Response: '2009-04-02;14:32:12'
The waveform was created on April 2, 2009 at 14 hrs 32 min
Usage: Setting only
Using the Arbitrary Waveform Generator (ARB)
To Next Page
Loading...