Getting Started
R&S
®
SMW200A
39User Manual 1175.6632.02 ─ 30
2
3
1
Figure 3-3: Touchscreen elements
1 = Status bar (frequency and level display)
2 = Block diagram
3 = Taskbar/softkey bar
Any user interface elements that react to a click by a mouse pointer also react to a tap
on the screen, and vice versa. Using the touchscreen, you can perform the following
tasks (among others) by the tap of your finger:
●
Changing a setting
●
Selecting new settings
●
Scrolling through the list of parameters
●
Saving or recalling settings
●
Routing the signal flow
●
Opening and closing dialogs
See also:
●
Chapter 3.5, "Instrument Control", on page 90, for operating the touchscreen.
●
Chapter 17.1, "Cleaning", on page 1271, for instructions on cleaning the screen.
3.2.1.2 Keys
Utility Keys
The utility keys cause the R&S SMW to return to a defined instrument state and pro-
vide information on the instrument and assistance.
Instrument Tour
To Next Page
Loading...