Rohde & Schwarz R&S SMW200A - Rear Panel Tour

Getting Started
R&S
®
SMW200A
44User Manual 1175.6632.02 ─ 30
The connector type depends on the maximum frequency f
max
, see table below.
Table 3-9: RF connector types of the frequency options
Installed RF frequency
option
Connector type Frequency range
RF A: R&S SMW-B1003/-
B1006/-B1007
RF B: R&S SMW-B2003/-
B2006/-B2007
N female f
max
≤ 7.5 GHz
RF A: R&S SMW-B1012/-
B1020/-B1031/-B1040/-
B1040N
RF B: R&S SMW/-B2012/-
B2020/-B2031
PC 2.92 mm female
Instrument equipped with interchangeable
PC 2.92 mm test port adapter.
f
max
≤ 40 GHz
RF A: R&S SMW-B1044/-
B1044N
RF B: R&S SMW-B2044/
B2044N
PC 1.85 mm female
Instrument equipped with PC 1.85 mm inter-
changeable female/female wear and tear adapter.
f
max
≤ 44 GHz
Note: The PC 1.85 mm male connector for up to 44 GHz comes with a protective
1.85 mm female adapter to prevent the sensitive connector from damage.
It is available as a spare part, and can be replaced if damaged. Contact your
Rohde & Schwarz support center or www.customersupport.rohdeschwarz.com for
information.
How to: Chapter 3.1.9, "Connecting to RF A/RF B", on page 33
3.2.2 Rear Panel Tour
This section provides an overview of the connectors on the rear panel of the instru-
ment. For technical data of the connectors, refer to the data sheet.
Instrument Tour