Configuring the RF Signal
R&S
®
SMW200A
533User Manual 1175.6632.02 ─ 30
The following modulations are configured:
●
Path A (first image)
Amplitude modulation that is performed with an internally generated trapezoid
wave signal and a superposed external signal.
●
Path B (second image)
Amplitude modulation, performed with the sine signal of the LF Generator 2 and a
superposed noise signal.
Simultaneously, the instrument performs frequency modulation with an LF signal
that is composed of a sine wave (LF Generator 1, path B) and an external signal.
●
LF OUT x (the same in both images)
The LF signal of the LF generator 1 in path A is routed to the first LF output, and
the signal of second LF generator - to the second LF output.
This assignment is not mandatory. It has been chosen randomly and can be
changed arbitrarily.
1 2 3
4
5
6
7
8
9
10
11
12
Figure 8-17: Example: Elements in the analog modulations "Overview" tab
Analog Modulations
To Next Page
Loading...