Getting Started
R&S
®
SMW200A
54User Manual 1175.6632.02 ─ 30
Figure 3-9: Block diagram: Generating an unmodulated signal
Tip: Alternative way to access the instrument functions. To fulfill the same task, you
can use other hot spots in the block diagram, the provided functions under the "RF"
block or the function front panel keys.
Try out the following:
●
On the "Status Bar" and in the block diagram, tap the underlined labels
,
and .
Or:
● Select "Block Diagram > RF A" block, navigate through the context menu, and
use the settings provided in the "Frequency" and "Level" dialog.
Trying Out the Instrument
To Next Page
Loading...