Configuring the RF Signal
R&S
®
SMW200A
552User Manual 1175.6632.02 ─ 30
The height of the bars corresponds to the selected amplitude of the pulse signal.
Figure 8-18: Pulse Graph - single pulse
1 = Pulse Period
2 = Pulse Delay
3 = Pulse Width
4 = Pulse Zoom Position
Figure 8-19: Pulse Graph - double pulse
1 = Pulse Period
2 = Pulse Width
3 = Double Pulse Delay
4 = Double Pulse Width
5 = Pulse Zoom Position
Zooming
You can zoom into the diagram to visualize the graph in more detail:
●
"Zoom Position": Sets the focus on the time axis where to enlarge the graph.
●
"Zoom In": Enlarges the graph at the selected position.
Analog Modulations
To Next Page
Loading...