Rohde & Schwarz R&S SMW200A - Page 653

Multi-Instrument Setups
R&S
®
SMW200A
653User Manual 1175.6632.02 ─ 30
Remote command:
:SCONfiguration:RFALignment:SETup:PREDefined:CATalog? on page 937
:SCONfiguration:RFALignment:SETup:FILE:PREDefined on page 937
:SCONfiguration:RFALignment:SETup:CATalog? on page 938
:SCONfiguration:RFALignment:SETup:FILE on page 938
Info
Accesses the "RF Ports Setup Info" dialog that displays summary information on the
configured settings, see Chapter 10.4.2.2, "RF Ports Setup Info", on page 655.
Test Setup
Displays the cabling diagram fo the current setup.
The diagram is interactive. Click an element to access further settings.
Indicated are:
Primary instrument
The primary instrument, incl. alias name, serial number and number
of RF outputs.
The primary instrument is the upper most instrument displayed in
dark blue color. Click the block to open a dialog with its "Hostname /
IP Address" and for quick access to the RF Port Setup File Editor dia-
log ("Edit Setup").
Secondary instrument(s)
The secondary instruments, incl. their remote connection status, alias
name, serial number and number of RF outputs.
Click the block to open a dialog with information on the "Hostname /
IP Address", "Remote Status" and for quick access to the RF Port
Setup File Editor dialog ("Edit Setup").
Figure 10-4: Secondary instrument dialog
Generating Phase-Coherent Synchronous and Aligned Signals