Rohde & Schwarz R&S SMW200A - Page 704

File and Data Management
R&S
®
SMW200A
704User Manual 1175.6632.02 ─ 30
Remote command:
:HCOPy:FILE[:NAME]:AUTO:STATe on page 883
File...
In "Automatic Naming > Off" mode, accesses the standard file select dialog for select-
ing the filename and folder the hardcopy is stored in.
If you have enabled "Automatic Naming", the instrument displays the automatically
generated filename.
Remote command:
:HCOPy:FILE[:NAME] on page 881
Format
Selects the output file format, for example *.bmp, *.jpg*.xpm and *.png.
Remote command:
:HCOPy:IMAGe:FORMat on page 881
:HCOPy:DEVice:LANGuage on page 881
Options...
Accesses Hardcopy Options dialog.
Save
Saves a hardcopy of the current display as a file.
Remote command:
:HCOPy[:EXECute] on page 882
Hardcopy Options > Common
Access: select "Hardcopy > Options... > Common".
With the provided settings, you can customize the file format and the syntax of the
automatically assigned filename.
Automatic Naming ← Hardcopy Options > Common
If enabled, creates the output filenames automatically according to the rules set with
the Hardcopy Options > Automatic Naming settings.
Remote command:
:HCOPy:FILE[:NAME]:AUTO:STATe on page 883
Format ← Hardcopy Options > Common
Selects the output file format, for example *.bmp, *.jpg*.xpm and *.png.
Creating Screenshots of Current Settings