Rohde & Schwarz R&S SMW200A - Configuring Local and Global Connectors

General Instrument Functions
R&S
®
SMW200A
714User Manual 1175.6632.02 ─ 30
12.1.5.2 Setting the Screen Saver
You can enable a screen saver that automatically turns off the display after a user-
defined period of time. The screen saver is activated if no settings are made on the
touch screen, or via keys or the rotary knob during the selected wait time.
To activate the screen saver
1. Press the [SETUP] key.
2. Select "User Interface > Display"
3. Activate the "Screen Saver".
4. Define the "Wait Time" in minutes.
The instrument turns off the display after the defined period of time.
5. To reactivate the display, tap the screen or press any key on the front panel.
To deactivate the screen saver
1. Press the [SETUP] key.
2. Select "User Interface > Display"
3. Disable the "Screen Saver" state.
12.1.5.3 Adjusting Appearance of the User Interface
You can disable the snapshot preview of dialog in the taskbar .
1. Press the [SETUP] key.
2. Select "User Interface > Appearance".
3. If necessary, enable "Display Dialog Snapshots".
The changes take effect immediately.
12.2 Configuring Local and Global Connectors
The R&S SMW is equipped with multipurpose bi-directional connectors.
Configuring Local and Global Connectors