Getting Started
R&S
®
SMW200A
75User Manual 1175.6632.02 ─ 30
The test models is a function for quick selection and settings adjustment according
to one of the various EUTRA test models (E-TM).
A standard "File Select" function enables you to select form files with predefined
settings.
Tip: On the front panel, press the [HELP] key to retrieve detailed information on the
current settings and on the contents of the predefined files.
4. Navigate to a file, for example to the E-TM1_1__10MHz (an E-TM1.1 test model
with 10 MHz channel bandwidth) and confirm with "Select".
The dialog closes automatically and the user interface confirms the name of the
selected file.
5. In the "EUTRA/LTE > General" tab, select "State > On".
Close the dialog.
6. On the "Status Bar", tap the "Freq" and "Lev" fields and enter new values, for
example 2.143
GHz and -20
dBm.
Trying Out the Instrument
To Next Page
Loading...