Rohde & Schwarz R&S SMW200A - How to Move a Portable License

General Instrument Functions
R&S
®
SMW200A
750User Manual 1175.6632.02 ─ 30
5.
To request enabling a license, select (activate) in the toolbar.
6.
To return the license, select
(discontinue).
7. Follow the instructions on the screen.
To manage licenses on a remote license server
See R&S
®
License Server - Managing Floating Licenses - User Manual for details on
the license server application.
12.4.3 How to Move a Portable License
This example is intended to explain how to perform the required steps at the instru-
ment.
Use a USB flash drive to transfer the license key files between the instruments and the
browser.
We assume knowledge about the handling of the R&S License Manager online tool
and the description of the whole process.
1. Open your browser. Enter https://extranet.rohde-schwarz.com/service.
Select "Manage Licenses > Move Portable License".
The first step requires the Device IDs of the source and target instruments.
2. To find out the Device IDs, proceed as follows:
a) On the source instrument, select "System Config > Setup > Instrument Assem-
bly > Manage License Keys > New License > Device ID".
b) On the target instrument, select "System Config > Setup > Instrument Assem-
bly > Manage License Keys > New License > Device ID".
c) In the browser, select "Manage Licenses > Move Portable License > Select
Devices" and enter the Device IDs.
3. On the source instrument, select "System Config > Setup > Instrument Assembly >
Manage License Keys > Installed License Keys > License Keys Table".
Navigate to the portable license you want to move.
Select the "Export License to File" column.
A standard file manager dialog opens.
4. Enter a filename. Save the exported license key, e.g.
k123_portable_key_to_move.xml.
Managing Licenses and License Keys